Special Purpose Enclosures
Special Purpose electrical enclosures are designed to meet the specific needs of a particular application. B&R’s range includes pushbutton, double door, mining and switchboard building enclosures. If your electrical enclosure has a special requirement, this might be a good place to start.
Bowen Series – 316SS with Sunshades
An IP66 enclosure with sunshades, perfect for increased mechanical protection and designed to meet the harsh demands of mining environments.
Bowen Series – 316SS
An IP66, special purpose, sloping roof enclosure with a 40° sloping roof and overhang for reduced material build up.
Connector TE – 316SS
The Connector TE is a stainless steel termination enclosure with a screw on lid ideal for applications where a smaller enclosure is required for installing terminations or push buttons.
Connector TE – Zinc Coated Steel
The Connector TE is a steel termination enclosure with a screw on lid ideal for applications where a smaller enclosure is required for installing terminations or push buttons.
Connector TE MF – 316SS
The Connector TE is a stainless steel termination enclosure with a screw on lid ideal for applications where a smaller enclosure is required for installing terminations or push buttons.
Finucane FI – 316SS
The Finucane FI enclosure and sun shield has been developed to meet the demands of the Australian environment and accommodate the requirements of the Pilbara Iron Ore projects.
Hedland PH – 316SS
A 15 degree sloping roof enclosures for electrical and electronic control equipment in rugged, dusty industrial applications.
Incline SR – 316SS
The Incline SR is a stainless steel IP66 enclosure for the mining and mineral processing industries. It features an innovative 30 degree sloping roof that reduces the build up of debris and waste material.
IP Switchboards
Designed specifically for outdoor environments, the IP Switchboard is an extension of B&R’s tried and trusted Monarch IP range.
Lambert LB – 316SS
The Lambert LB is a 316 stainless steel, sun shaded enclosure designed for applications where the enclosure has a high risk of heating up due to excessive solar radiation.
Miner ME – Zinc Coated Steel
The Miner ME is designed to be used in underground for 1000 Volt applications. It’s made from 2mm thick steel with polyester paint to provide superior protection and visibility.
Monarch SMB
An IP66, small main board (up to 630A) developed as a solution to local electricity and distribution requirements in remote metering application or emergency power restorations.
Pilbara SP
The Pilbara SP is an IP66 enclosure for the mining and mineral processing industries. Developed to withstand the harsh environments of the Pilbara, it features a 30 degree sloping roof.
Pilbara SP with Sunshades
An IP66, with sunshades designed for the most common mining, mineral processing and infrastructure projects.
Signature SE – Zinc Coated Steel
B&R’s range of IP43/IP55, type-tested, certified, switchboard building system for Low Voltage switchboards and motor control centres (MCC’s).
Universal DD – Stainless Steel
The Universal DD is a stainless steel IP55, double door enclosure from B&R. It has no centre mullion making installation and access to equipment easy and convenient.
Universal DD – Zinc Coated Steel
The Universal DD is a steel IP55, double door enclosure from B&R. It has no centre mullion making installation and access to equipment easy and convenient.
