Stainless Steel Enclosures
316 Stainless Steel Electrical Enclosures
Stainless steel enclosures protect electrical equipment where there is a potential of corrosion from the surrounding environment. Usually this occurs where there is is some risk of salt water coming into contact with the enclosure, whether it be from sea spray, or some of the inland areas where the ground water can be quite high in salts. For more information on this see our articles on material selection and tea staining.
B&R Enclosures uses Australian Stainless Steel Development Association (ASSDA) processes and only 316 stainless steel to ensure a long enclosure life and minimal maintenance.
Ausrack IP – 316SS
A 19″ cabinet system designed to protect sensitive network equipment from harsh environments where equipment may be exposed to dust or water.
Bowen Series – 316SS
An IP66, special purpose, sloping roof enclosure with a 40° sloping roof and overhang for reduced material build up.
Bowen Series – 316SS with Sunshades
An IP66 enclosure with sunshades, perfect for increased mechanical protection and designed to meet the harsh demands of mining environments.
Connector TE – 316SS
The Connector TE is a stainless steel termination enclosure with a screw on lid ideal for applications where a smaller enclosure is required for installing terminations or push buttons.
Connector TE MF – 316SS
The Connector TE is a stainless steel termination enclosure with a screw on lid ideal for applications where a smaller enclosure is required for installing terminations or push buttons.
Finucane FI – 316SS
The Finucane FI enclosure and sun shield has been developed to meet the demands of the Australian environment and accommodate the requirements of the Pilbara Iron Ore projects.
Fixed Lid Control Station
Ex e rated, explosion protected, fixed lid pushbutton control station, is rated to IP66/67 and is pre-configured or custom built. Suitable for use within petrochemical dust and grain applications and Zones 1 & 2, 21 & 22.
Flat Roof Control Station
The Ex e explosion protected, flat roof control station, is rated to IP66 and is pre-configured or custom built for ease of installation one. Suitable for use within petrochemical dust and grain applications and Zones 1 & 2, 21 & 22.
Flat Roof Terminal Enclosure
The flat roof electrical box is made from 316SS and suitable for use in Zones 1 & 2, 21 & 22 applications.
Hedland PH – 316SS
A 15 degree sloping roof enclosures for electrical and electronic control equipment in rugged, dusty industrial applications.
Horizon N Series
A range of metal fabricated metering enclosures specifically engineered to suit the Service and Installation Rules (SIR) of NSW based Electricity Distributors.
Horizon Q Series
An IP23 enclosure suitable for domestic and light commercial metering installations providing safety, quality and performance.
Horizon S Series
A range of metal fabricated meter enclosures specifically engineered to suit the Service and Installation Rules (SIR) of SA based Electricity Distributors.
Horizon T Series
A range of metal fabricated meter enclosures specifically engineered to suit the Service and Installation Rules (SIR) of TAS based Electricity Distributors.
Horizon V Series
A range of metal fabricated meter enclosures specifically engineered to suit the Service and Installation Rules (SIR) of VIC based Electricity Distributors.
Incline SR – 316SS
The Incline SR is a stainless steel IP66 enclosure for the mining and mineral processing industries. It features an innovative 30 degree sloping roof that reduces the build up of debris and waste material.
Infinity 3G – Primo Range
Switchboard building system for systems up to 630A suitable for applications requiring an IP66 installation.
Infinity Pre-Configured Switchboard – New South Wales
A pre-wired switchboard for multi-residential and commercial applications.
Infinity Pre-Configured Switchboard – Queensland
A pre-wired switchboard for multi-residential and commercial applications.
Infinity Pre-Configured Switchboard – Victoria
A pre-wired switchboard for multi-residential and commercial applications.
Infinity Pre-configured Switchboard South Australia
A pre-wired switchboard for multi-residential and commercial applications.
Lambert LB – 316SS
The Lambert LB is a 316 stainless steel, sun shaded enclosure designed for applications where the enclosure has a high risk of heating up due to excessive solar radiation.
Monarch IP – 316SS
Monarch IP from B&R is an IP66, 316 stainless steel general purpose enclosure and switchboard building system with a huge range of accessories.
Monarch IP – Viewing Window (SS)
Monarch IP from B&R is an IP66, 316 stainless steel general purpose enclosure and switchboard building system with a huge range of accessories.
Monarch SMB
An IP66, small main board (up to 630A) developed as a solution to local electricity and distribution requirements in remote metering application or emergency power restorations.
Pilbara SP
The Pilbara SP is an IP66 enclosure for the mining and mineral processing industries. Developed to withstand the harsh environments of the Pilbara, it features a 30 degree sloping roof.
Pilbara SP with Sunshades
An IP66, with sunshades designed for the most common mining, mineral processing and infrastructure projects.
Rail Signalling Enclosure Solutions
The Australian Made enclosure manufactured to suit the toughest conditions and Australian Rail Operators.
Screwed Flat Roof Control Station
A customisable enclosure suitable for use in hazardous areas, chemical, petrochemical, dust and grain applications where a small enclosure is required.
Screwed Flat Roof Terminal Enclosure
A customisable enclosure for use in hazardous areas, chemical, petrochemical, dust and grain applications where a small enclosure is required.
Sloping Roof Control Station
Suitable for use in hazardous areas, chemical, petrochemical, dust and grain applications where a small enclosure is required.
Sloping Roof Terminal Enclosure
The sloping roof electrical box is made from 316SS and is suitable for use in hazardous areas, Zones 1 & 2, 21 & 22.
Universal DD – Stainless Steel
The Universal DD is a stainless steel IP55, double door enclosure from B&R. It has no centre mullion making installation and access to equipment easy and convenient.
Universal NI – 316SS
B&R’s Universal NI range of IP66 general purpose enclosures are often wall mounted using its integrated bolting. It is manufactured from 316 stainless steel with an N4 finish.
Universal NI – Viewing Window (SS)
B&R’s Universal NI range of IP66 general purpose enclosures are often wall mounted using its integrated bolting. It is manufactured from 316 stainless steel with an N4 finish.
